id stringlengths 8 10 | question stringlengths 68 1.77k | answer stringlengths 0 1.81k | chunks sequencelengths 2 39 | answers sequencelengths 1 1 | correct_chunks sequencelengths 0 1 | num_words int64 110 5.13k | num_tokens int64 401 7.71k | num_chars int64 1.18k 30k |
|---|---|---|---|---|---|---|---|---|
TRAIN_Q001 | Netcool/Impact (all versions): How is the Exit() action function expected to work with User Defined Functions? Netcool/Impact (all versions)
Using the Exit() action function within a User Defined Function in a Policy will not exit the Policy process. | This is because the Exit() parser function in IPL is designed to exit the immediate scope. To carry the action outside of the User Defined Function to the Policy level one would have to set a variable that is then tested immediately after the User Defined Function call | [
"IBM Exit() action within User Defined Function in Impact Policy Language - United States netcool; impact; netcool/impact; nci; ipl; policy; language; exit; exit(); function; user; defined; custom; udf; parser; action; set; global; variable; var; get; setglobalvar; getglobalvar; globalvar TECHNOTE (FAQ)\n\nQUESTION... | [
"This is because the Exit() parser function in IPL is designed to exit the immediate scope. To carry the action outside of the User Defined Function to the Policy level one would have to set a variable that is then tested immediately after the User Defined Function call"
] | [
0
] | 379 | 588 | 1,965 |
TRAIN_Q003 | How to configure SSL mutual authentication in IBM HTTP Server?
We are running IHS v7 and our application team has a specific webservice that they require SSL mutual authentication to be enabled for at the http server. Does anyone know how to set this up on IHS? Or any documentation?
Thanks
| The following steps help guide you through the proper set up of SSL within the IBM HTTP Server:
1. Confirm that the Global Security Kit (GSKit) is installed and meets the minimum requirements
2. Create a key database file and certificates needed to authenticate the Web server during an SSL handshake
3. Enable SSL directives within the IBM HTTP Server configuration file (httpd.conf)
4. Other considerations when enabling SSL directives within the IBM HTTP Server configuration file (httpd.conf)
5. Information that IBM WebSphere® Support needs to debug SSL configuration and certificate issues related to the IBM HTTP Server | [
"IBM Guide to properly setting up SSL within the IBM HTTP Server - United States ssl; handshake; secure socket layer; handshake failed; enable; ssl config; ssl setup; setup; IHS; crl; revocation; ssl; ssl; ssl; configure; config; config; config TECHNOTE (TROUBLESHOOTING)\n\nPROBLEM(ABSTRACT)\n The following informa... | [
"The following steps help guide you through the proper set up of SSL within the IBM HTTP Server: \n\n 1. Confirm that the Global Security Kit (GSKit) is installed and meets the minimum requirements\n \n \n 2. Create a key database file and certificates needed to authenticate the Web server during an SSL hands... | [] | 3,157 | 4,137 | 14,408 |
TRAIN_Q006 | Is ITNM exposed to Apache CXF vulnerability (CVE-2017-3156)? Is ITNM versions are affected by Apache CXF vulnerability (CVE-2017-3156), If yes then what are all the version will be affected and where I can find the details? | CVEID: CVE-2017-3156 [http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-3156]
DESCRIPTION: Apache CXF could provide weaker than expected security, caused by the failure to use the OAuth2 Hawk and JOSE MAC Validation code. A remote attacker could exploit this vulnerability using timing attacks to obtain sensitive information.
CVSS Base Score: 5.9
CVSS Temporal Score: See https://exchange.xforce.ibmcloud.com/vulnerabilities/130249 [https://exchange.xforce.ibmcloud.com/vulnerabilities/130249] for the current score
CVSS Environmental Score*: Undefined
CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N) | [
"IBM Security Bulletin: IBM Tivoli Network Manager IP Edition is affected by an Apache CXF vulnerability (CVE-2017-3156) - United States SECURITY BULLETIN\n\nSUMMARY\n Vulnerability has been addressed in the Apache CXF component of Tivoli Network Manager IP Edition. \n\nVULNERABILITY DETAILS\nCVEID: CVE-2017-3156 ... | [
"CVEID: CVE-2017-3156 [http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-3156]\nDESCRIPTION: Apache CXF could provide weaker than expected security, caused by the failure to use the OAuth2 Hawk and JOSE MAC Validation code. A remote attacker could exploit this vulnerability using timing attacks to obtain sensi... | [
0
] | 332 | 856 | 2,921 |
TRAIN_Q007 | Why do I get an exception when calling MQ after migrating my BPM environment (2035 MQRC_NOT_AUTHORIZED) ?
We migrated our BPM environment from V8.0 to 8.5.7. When we attempt to call the MQ service we are getting the following exception:
[10/16/17 13:50:05:273 AST] 0000026d SystemOut O
com.ibm.msg.client.jms.DetailedJMSSecurityException: JMSWMQ2013: The
security authentication was not valid that was supplied for QueueManager
'QM1' with connection mode 'Client' and host name 'MQ1(1414)'.
Please check if the supplied username and password are correct on the
QueueManager to which you are connecting.
...
Caused by: com.ibm.mq.MQException: JMSCMQ0001: WebSphere MQ call failed
with compcode '2' ('MQCC_FAILED') reason '2035' ('MQRC_NOT_AUTHORIZED').
at
com.ibm.msg.client.wmq.common.internal.Reason.createException(Reason.jav
a:204)
... 162 more
The same MQ service is working fine in the old BPM environment. User name and password configured for the queue is correct. However, when we check the MQ logs, we observing the username is not used, instead the sys admin user seems to be used. | Default component-managed authentication alias for outbound connections
For cases where it is impractical to change the application to use container-managed security, or to change it to supply a username and password directly on the createConnection call, it is possible to supply a default.
This default is called the "component-managed authentication alias" and cannot be configured via the administrative console (since WebSphere Application Server Version 7.0 when it was removed from the panels MQ connection factories). The below scripting samples show how to configure it using wsadmin:
* JACL:
wsadmin>set cell [ $AdminConfig getid "/Cell:mycell" ]
mycell(cells/mycell|cell.xml#Cell_1)
wsadmin>$AdminTask listWMQConnectionFactories $cell
MyCF(cells/mycell|resources.xml#MQConnectionFactory_1247500675104)
wsadmin>$AdminTask modifyWMQConnectionFactory MyCF(cells/mycell|resources.xml#MQConnectionFactory_1247500675104) { -componentAuthAlias myalias }
MyCF(cells/mycell|resources.xml#MQConnectionFactory_1247500675104)
* Jython:
wsadmin>cell = AdminConfig.getid("/Cell:mycell")
wsadmin>AdminTask.listWMQConnectionFactories(cell)
'MyCF(cells/mycell|resources.xml#MQConnectionFactory_1247500675104)'
wsadmin>AdminTask.modifyWMQConnectionFactory('MyCF(cells/mycell|resos urces.xml#MQConnectionFactory_1247500675104)', "-componentAuthAlias myalias")
'MyCF(cells/mycell|resources.xml#MQConnectionFactory_1247500675104)' | [
"IBM 2035 MQRC_NOT_AUTHORIZED Connecting to WebSphere MQ from WebSphere Application Server via CLIENT Bindings - United States TECHNOTE (TROUBLESHOOTING)\n\nPROBLEM(ABSTRACT)\n This article covers the most common reasons why an application running in WebSphere Application Server receives a 2035 MQRC_NOT_AUTHORIZED... | [
"Default component-managed authentication alias for outbound connections \n\nFor cases where it is impractical to change the application to use container-managed security, or to change it to supply a username and password directly on the createConnection call, it is possible to supply a default. \n\nThis default is... | [] | 2,299 | 4,002 | 16,494 |
TRAIN_Q008 | Is the Requisite Pro (ReqPro) feature/plugin supported with a 64-bit RAD/RSA(4WS) 851+ installation Is the Requisite Pro (ReqPro) feature/plugin supported with a 64-bit install of RAD/RSA(4WS) 851? | the Rational RequisitePro integration features/plugins are not supported or provided. These are only available as 32-bit eclipse plugins. | [
"IBM Rational Application Developer Support Policy for 64 bit technology - United States RSM; RSD; RSA; RAD; caspian64 bit; 64-bit; RAD 7 64 bit; RAD 7 OS; operating system; Rational Application Developer; X64; Windows 64 bit; supported OS; AMD; PMR #13878; 379; 000; 13878379000; 1263677; 64bit; 64 bit; 32 bit; 32b... | [
"the Rational RequisitePro integration features/plugins are not supported or provided. These are only available as 32-bit eclipse plugins."
] | [
6
] | 1,220 | 2,862 | 9,674 |
TRAIN_Q010 | managesdk.sh -listEnabledProfileAll fails with error: Couldn't get file lock.
I am installing WebGUI FP13 and it is failing with the symptoms described in below technote.
https://www-01.ibm.com/support/docview.wss?uid=swg21993160
As described in above technote when I run managesdk.sh script it fails with below errors.
./managesdk.sh -listEnabledProfileAll
Sep 26, 2018 10:14:12 AM java.util.prefs.FileSystemPreferences syncWorld
WARNING: Couldn't flush user prefs: java.util.prefs.BackingStoreException: Couldn't get file lock.
Please let me know what could be the issue? | The non-root ID that is being used to start WebSphere Application Server does not have a user_home directory. Therefore this non-root ID is unable to access the root user's "/etc/.java/.systemPrefs". This produces the aforementioned warning messages every 30 seconds in the profile_root/logs/server_name/systemout.log.
The root ID used to start Websphere Application Server can not find the Java system pref file. | [
"IBM Starting WebSphere Application Server gives warning message - Could not lock User prefs - United States Websphere; startup; FileSystemPreferences; user prefs; prefs; Could not lock User prefs TECHNOTE (TROUBLESHOOTING)\n\nPROBLEM(ABSTRACT)\n Warning message issued during the non-root or root startup of WebSphe... | [
"The non-root ID that is being used to start WebSphere Application Server does not have a user_home directory. Therefore this non-root ID is unable to access the root user's \"/etc/.java/.systemPrefs\". This produces the aforementioned warning messages every 30 seconds in the profile_root/logs/server_name/systemout... | [
1
] | 380 | 738 | 2,737 |
TRAIN_Q011 | Load SPSS 25 on a new computer I purchased SPSS 25 with a 12 month license on Jan 27. I loaded it and used it on my MacBook Pro. I now have a new MacBookPro. I was able to download the program but get a message that says I don't have a license. I do have the activation code. Can you please help me use this product on my new computer? Thanks! | Type (copy/paste) the following command:
sudo chown -R root:admin 20
2. Press Enter/Return.
3. Close Terminal.
4. Launch the License Authorization Wizard.
5. The warning message should no longer appear.
6. License your IBM SPSS Statistics product. | [
"IBM Getting a warning message 'You do not have the correct administrator privileges' when attempting to license a SPSS Statistics product on Mac OS. - United States TECHNOTE (TROUBLESHOOTING)\n\nPROBLEM(ABSTRACT)\n You have successfully installed an IBM SPSS Statistics product on a Mac computer. When you start th... | [
"Type (copy/paste) the following command: \n \n sudo chown -R root:admin 20\n \n 2. Press Enter/Return. \n 3. Close Terminal. \n 4. Launch the License Authorization Wizard. \n 5. The warning message should no longer appear. \n 6. License your IBM SPSS Statistics product."
] | [
1
] | 712 | 1,371 | 4,801 |
TRAIN_Q012 | Are there any instructions for ulimit settings for WebSphere running on Linux? Are there any instructions for ulimit settings for WebSphere running on Linux? | WebSphere Application Server Support recommends setting the ulimit -u or nproc to a value of 131072 when running on Linux to safely account for all the forked threads within processes that could be created. | [
"IBM Insufficient ulimit Value Causes Native OutOfMemory - United States TECHNOTE (TROUBLESHOOTING)\n\nPROBLEM(ABSTRACT)\n An out of memory may be observed on a system running WebSphere Application Server on Linux or AIX that is due to ulimit restrictions on number of process/threads per user. Further investigatio... | [
"WebSphere Application Server Support recommends setting the ulimit -u or nproc to a value of 131072 when running on Linux to safely account for all the forked threads within processes that could be created."
] | [
3
] | 659 | 998 | 4,263 |
TRAIN_Q014 | NMA agent installation failure
Hello, I'm trying to install the NMA agent from ITM for Virtual Environment package on a Linux x86-64. The preferred method would be remote install, but I'm not even able to perform tamcd addbundles as it complains about missing prerequisites.
If I try to install the agent locally on the Linux machine, the list of available agents does not include NMA agent at all.
Is there a solution to this problem? | The issues should be corrected at Installer level, APAR IV84919 has been opened to fix them.
Anyway, since the correction involves the installation component, it will not be available until next release, when the Installation package will be built again. | [
"IBM Problems installing NMA agent (N4 agent) on Linux x86-64 - United States ITM Virtual environments install NMA N4 unable find bundle prerequisites CI addbundles TECHNOTE (TROUBLESHOOTING)\n\nPROBLEM(ABSTRACT)\n The installation of NMA agent from package ITM for Virtual Environment V7.2.0.3 is failing with both... | [
"The issues should be corrected at Installer level, APAR IV84919 has been opened to fix them. \n\nAnyway, since the correction involves the installation component, it will not be available until next release, when the Installation package will be built again."
] | [
1
] | 862 | 1,646 | 5,988 |
TRAIN_Q016 | What can be done about "Too many open files" messages in the DASH systemOut? What can be done about "Too many open files" messages in the DASH systemOut log? | The command ulimit -Xa will display all current settings that are set for the current login session, where X represents the hard (H) or soft (S) limits to be displayed. By default, if no value is supplied for X, soft limits will be displayed. However if a process is already running, it may have a different ulimit configurations than the current shell that you run the ulimit -a command in. | [
"IBM Guidelines for setting ulimits (WebSphere Application Server) - United States ulimits; linux; unix; aix; openfiles; opensockets; sockets; socket; files; ulimit-n; limits.conf; configuration; security; etc; root; init; crontask; cron; nodeagent; dmgr; appserver; server; applicationserver; application; nofile; u... | [
"The command ulimit -Xa will display all current settings that are set for the current login session, where X represents the hard (H) or soft (S) limits to be displayed. By default, if no value is supplied for X, soft limits will be displayed. However if a process is already running, it may have a different ulimit ... | [
1
] | 2,147 | 3,536 | 13,955 |
TRAIN_Q017 | Does Portal 6.1.x support Oracle 12c?
We are running Portal Server v6.1.0.6 and I need to know what the newest version of Oracle that is supported with the WPS 6.1.0.6?
Specifically, if Oracle 12c is not supported, what version of Oracle 11g is? | Oracle 11gR2 V11.2.0.1 (including RAC) | [
"IBM WebSphere Portal V6.1.0.5 and V6.1.5.2 hardware and software requirements - AIX - United States DSRdoc; SystemRequirementsDocument; prereq; coreq; installation prerequisites; 6105eGA 6152eGA V6105 V6.1.0.5 6.1.0.5 6105 6152 PRODUCT DOCUMENTATION\n\nABSTRACT\n IBM WebSphere Portal V6.1.0.5 and 6.1.5.2 hardware ... | [
"Oracle 11gR2 V11.2.0.1 (including RAC)"
] | [
11
] | 2,549 | 7,361 | 21,949 |
TRAIN_Q018 | Why does the transaction time out when I try to delete a virtual portal? Transaction timeout occurs when I try to delete a virtual portal. Managed pages is enabled. Why? | With the introduction of Managed Pages in WebSphere Portal 8.0, virtual portal deletions require more transaction time when removing from the system. This increased transaction time can lead to an error situation if either of the following timeouts is exceeded:
* the total and/or maximum transaction lifetime timeout value(s) for the server
* the WCM component's transaction timeout | [
"IBM Deletion of virtual portal fails with transaction timeout - United States virtual portal; timeout; delete; portlet; EJPAH4000E; EJPEB0804E; rollbackexception; admin; WTRN0006W TECHNOTE (TROUBLESHOOTING)\n\nPROBLEM\nAttempt to delete virtual portal via Virtual Portal Manager portlet fails with error:\n\nEJPAH40... | [
"With the introduction of Managed Pages in WebSphere Portal 8.0, virtual portal deletions require more transaction time when removing from the system. This increased transaction time can lead to an error situation if either of the following timeouts is exceeded: \n\n * the total and/or maximum transaction lifetime ... | [
0
] | 395 | 2,191 | 6,491 |
TRAIN_Q020 | HATS Plugin Download
Hi
I have RDZ 9.0 and want to install the HATS plugin.
I've downloaded from this link:
http://www.ibm.com/developerworks/downloads/ws/whats/
HATS 9.0.0.0 but it won't install because RDZ itself is not enough and it sais I need one of the following:
IBM Rational Application Developer for WebSphere Software
IBM Rational Software Architect for WebSphere Software
IBM Rational Developer for i for SOA Construction
IBM Rational Business Developer
IBM Integration Developer
which I don't have.
Where can I download the HATS version that is compatible with RDZ 9.0 and doesn't need anything else? | For installation instructions, see Installing HATS [http://pic.dhe.ibm.com/infocenter/hatshelp/v90/topic/com.ibm.hats.doc/doc/gsinstal.htm] in the Rational Host Access Transformation Services (HATS) V9.0 Information Center. | [
"IBM Rational Host Access Transformation Services 9.0 - United States service release; modpack; mod pack; upgrade; refresh; refresh pack DOWNLOADABLE FILES\n\nABSTRACT\n IBM Rational Host Access Transformation Services 9.0 has been made generally available and contains fixes to version 9.0. \n\nDOWNLOAD DESCRIPTION... | [
"For installation instructions, see Installing HATS [http://pic.dhe.ibm.com/infocenter/hatshelp/v90/topic/com.ibm.hats.doc/doc/gsinstal.htm] in the Rational Host Access Transformation Services (HATS) V9.0 Information Center."
] | [
2
] | 857 | 1,760 | 6,954 |
TRAIN_Q026 | Where can I find the ITM VMware VI Agent Reports package for v 7.2?
I am only able to find ver 6x reports. My initial search for the v7.2 reports took me to this link but it does not have v 7.2:
https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/W22ac5f3ebabf_4ff4_bd55_1a897c9a443e/page/Report%20Catalog
| Download RELEASE DATE LANGUAGE SIZE(Bytes) Download Options
What is Fix Central(FC)? [https://www.ibm.com/support/fixcentral/help?page=swfaqs] 7.2.0.2-TIV-ITM_VMWVI_RPT-IF0001 23 Jan 2015 English 53552332 FC | [
"IBM Monitoring for Virtual Environments: VMware VI 7.2.0.2-TIV-ITM_VMWVI_RPT-IF0001 - United States DOWNLOADABLE FILES\n\nABSTRACT\n This is an Interim Fix for IBM Tivoli Monitoring for Virtual Environments: VMware VI 7.2 Fix Pack 2 reports \n\nDOWNLOAD DESCRIPTION\n(C) Copyright International Business Machines C... | [
"Download RELEASE DATE LANGUAGE SIZE(Bytes) Download Options \nWhat is Fix Central(FC)? [https://www.ibm.com/support/fixcentral/help?page=swfaqs] 7.2.0.2-TIV-ITM_VMWVI_RPT-IF0001 23 Jan 2015 English 53552332 FC"
] | [
16
] | 1,576 | 3,507 | 13,437 |
TRAIN_Q027 | Why are we not able to create new pages using the Manage Pages Portlet? We are using Portal 8.5 on Windows,
From WebSphere Portal Administration console. we go to ‘Manage Pages’- > Select ‘Content root’ item from table -> ‘New Page’ button, after entering the new page details and hitting OK we receive following error:
EJPAS0017E: Unable to create PageName
The error in SystemOut.log shows:
DefaultTransa E Message: Could not save object in repository.,
Cause: javax.jcr.RepositoryException: RT0002E: Error while calling a function createItems of PLS data manager
com.ibm.workplace.wcm.services.repository.RepositoryException:
Message: Could not save object in repository., Cause: javax.jcr.RepositoryException: RT0002E: Error while calling a function createItems of PLS data manager
...
Caused by: com.ibm.icm.da.DBAccessException:
java.sql.SQLFeatureNotSupportedException: DSRA1300E: Feature is not implemented: PreparedStatement.setBinaryStream
at com.ibm.icm.da.portable.data.WideTableData.changeItems(WideTableData.java:857) | The JDBC driver does not meet WebSphere Portal v8's prerequisites. | [
"IBM JDBC driver or database insufficiencies cause administration portlets to fail. - United States RT0002E; JDBC; database; driver; RepositoryException; PLS; EJPAS0017E TECHNOTE (TROUBLESHOOTING)\n\nPROBLEM\nYou attempt to create a new page via the Manage Pages portlet or add a portlet to a page via the Edit Layou... | [
"The JDBC driver does not meet WebSphere Portal v8's prerequisites."
] | [
2
] | 313 | 781 | 2,799 |
TRAIN_Q028 | Help with Security Bulletin: Apache Commons FileUpload Vulnerabilities in IBM WebSphere MQ File Transfer Edition component (CVE-2016-1000031) I need to understand details regarding Security Bulletin: Apache Commons FileUpload Vulnerabilities in IBM WebSphere MQ File Transfer Edition component (CVE-2016-1000031). | CVEID:CVE-2016-1000031 [http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2016-1000031]
DESCRIPTION:Apache Commons FileUpload, used in IBM WebSphere MQ File Transfer Edition, could allow deserialization of untrusted data in the DiskFileItem class of the FileUpload library. A remote attacker could exploit this vulnerability to execute arbitrary code under the context of the current process.
CVSS Base Score: 9.8
CVSS Temporal Score: Seehttps://exchange.xforce.ibmcloud.com/vulnerabilities/117957 [https://exchange.xforce.ibmcloud.com/vulnerabilities/117957]for the current score
CVSS Environmental Score*: Undefined
CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H) | [
"IBM Security Bulletin: Apache Commons FileUpload Vulnerabilities in IBM WebSphere MQ File Transfer Edition component (CVE-2016-1000031) - United States SECURITY BULLETIN\n\nSUMMARY\n The DiskFileItem class in Apache Commons Fileupload before version 1.3.3, used in IBM WebSphere MQ File Transfer Edition, specifica... | [
"CVEID:CVE-2016-1000031 [http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2016-1000031]\nDESCRIPTION:Apache Commons FileUpload, used in IBM WebSphere MQ File Transfer Edition, could allow deserialization of untrusted data in the DiskFileItem class of the FileUpload library. A remote attacker could exploit this vul... | [
1
] | 348 | 827 | 2,989 |
TRAIN_Q029 | TWS / DWC and WebSphere 8.5.5.4+ WebSphere for TWS & DWC were upgraded to 8.5.5.4 on most servers in a particular environment. However, any TWS servers that still had 8.5.5.2, could no longer be seen by the new DWC / WAS 8.5.5.4 servers. Those lower WAS version engines could not be added to the DWC.
Errors seen are:
AWSUI0833E The operation could not be completed. There has been a communication failure.
The internal message is: AWSJCO005E WebSphere Application Server has given the following error: Error getting WsnNameService properties.
What is the reason? | DWC 9.3 is packaged with WAS 8.5.5.4 and due to known vulnerabilities has SSLV3 disabled. However TWS 9.2 and earlier versions use SSLv3 by default and so the DWC 9.3 cannot connect | [
"IBM How Connect TDWC 9.3 to TWS Engine lower level release - United States dwc 93; connect; SSL ; TLS TECHNOTE (TROUBLESHOOTING)\n\nPROBLEM(ABSTRACT)\n DWC 9.3 users cannot connect to TWS Engine lower level releases (8.5.1 until 9.2) \n\nSYMPTOM\nUnable to connect to TWS 8.5.1 ,8.6 or 9.1/9.2 from DWC 9.3. \n\nChe... | [
"DWC 9.3 is packaged with WAS 8.5.5.4 and due to known vulnerabilities has SSLV3 disabled. However TWS 9.2 and earlier versions use SSLv3 by default and so the DWC 9.3 cannot connect"
] | [
0
] | 277 | 658 | 2,101 |
TRAIN_Q031 | Request fails with "non idempotent request method - RFC 2616 sec 10.3. " When a request is routed through DataPower and a redirect is done on a POST, the redirect will fail in DataPower and we can expect the following message to be logged in the error message: "non idempotent request method - RFC 2616 sec 10.3." How do I solve the problem? | To resolve the issue, the IBM WebSphere DataPower SOA appliance web application firewall can be configured to handle these "302 Redirects". | [
"IBM Handling 302 redirect error message in a Web Application Firewall - United States HTTP; Redirect; 302; non idempotent TECHNOTE (TROUBLESHOOTING)\n\nPROBLEM(ABSTRACT)\n DataPower is preventing POST based HTTP redirect in accordance with RFC and displays this as part of the error in the logs:\n\nRedirect and fai... | [
"To resolve the issue, the IBM WebSphere DataPower SOA appliance web application firewall can be configured to handle these \"302 Redirects\"."
] | [
3
] | 414 | 1,066 | 3,410 |
TRAIN_Q033 | Scheduled reports fail after changing password Scheduled reports fail after changing password | For IBM Cognos Business Intelligence(BI) deployments that do not implement a single sign-on (SSO) solution, stored credentials used for running scheduled activities can be automatically updated. When a user logs into the IBM Cognos BI application with a user name and password, the trusted credential used to run schedules when not logged in will be refreshed as well. This removes the burden from the end user of having to remember to manually refresh their trusted credentials and may eliminate failed activities caused by changed or expired user credentials.
The credential refresh behaviour is controlled by the Security > Authentication > Automatically renew trusted credential setting in Cognos Configuration. | [
"IBM Automatically renew trusted credential - United States security; trusted credentials SSO renew TECHNOTE (FAQ)\n\nQUESTION\n How do I choose the value to use for the Security > Authentication > Automatically renew trusted credential setting? \n\nANSWER\nFor IBM Cognos Business Intelligence(BI) deployments that ... | [
"For IBM Cognos Business Intelligence(BI) deployments that do not implement a single sign-on (SSO) solution, stored credentials used for running scheduled activities can be automatically updated. When a user logs into the IBM Cognos BI application with a user name and password, the trusted credential used to run sc... | [
0
] | 431 | 630 | 2,902 |
TRAIN_Q034 | ITNM 4.2 Fix Pack 3 link and build number?. ITNM 4.2 FP3 is available, if yes then where we can download?. | http://www.ibm.com/support/knowledgecenter/en/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html?view=kc#relnotes__description | [
"IBM Tivoli Network Manager IP Edition 4.2.0 Fix Pack 3, 4.2.0-TIV-ITNMIP-FP0003 - United States DOWNLOADABLE FILES\n\nABSTRACT\n This fix pack is a cumulative fix release and addresses several APARs and internally found issues since the release of Tivoli Network Manager IP Edition 4.2.0 Fix Pack 2. \n\nDOWNLOAD D... | [
"http://www.ibm.com/support/knowledgecenter/en/SSSHRK_4.2.0/itnm/ip/wip/relnotes/reference/nmip_rn.html?view=kc#relnotes__description"
] | [
5
] | 505 | 2,463 | 6,760 |
TRAIN_Q038 | We want to backout the Cognos component of Business Monitor to a previous version. What do we have to take care of? We want to backout the Cognos component of Business Monitor to a previous version. What do we have to take care of? | Stop the Cognos service and ensure that Cognos Configuration is not running.
2. When setting up the configuration of a newly installed Cognos BI environment, it is important to note that if you configure the new installation against the original content store, it is permanently upgraded to the new version and can no longer be used in the original environment. As a result, always create a backup of the content store prior to upgrading.
If a roll back to the original version is required, you can simply restore the backup. However, any work done after the content store has been upgraded (reports, models, security, etc...) to the new version will be lost, as all of this information is saved in the content store.
If you try to revert back to an earlier environment configured against the upgraded content store, you will get an error similar to the one below:
CM-CFG-5027 Unable to upgrade the content store to the to the version N that is compatible with this version of Content Manager. The current version of the content store is M.
3. Also, please refer to the notes on the fix pack which would include perquisites on Backup/Restore of content store and also other requirements.
4. For versions 8 - 10.2.1: In the <cognos_install>/uninstall/backup directory there will be a list of date stamped folders with the applied fix packs and/or interim fixes.
For versions 10.2.1 FP1 and above: This is stored in the <cognos_install>/bkp directory
5. Go into the folders and check the cmplst.txt file and check for the correct version to revert to.
6. Once the correct version is found, copy the contents of the whole folder and paste it at the <cognos_install> level, which will overwrite the files applied by fix pack or interim fix update.
7. Start the Cognos service. | [
"IBM How to Rollback From a Fix Pack or Interim Fix to an Earlier Build - United States uninstall; revert; downgrade; hotsite; HS; out; fixpack TECHNOTE (FAQ)\n\nQUESTION\n There may be times when there is a need to remove a previously installed Fix Pack or Interim Fix (hotsite) and revert to the original installed... | [
"Stop the Cognos service and ensure that Cognos Configuration is not running. \n 2. When setting up the configuration of a newly installed Cognos BI environment, it is important to note that if you configure the new installation against the original content store, it is permanently upgraded to the new version and c... | [] | 513 | 688 | 2,994 |
TRAIN_Q039 | How to remove the default -Xcompressedrefs from my WebSphere Application Server My understanding is that for performance reasons, the WebSphere Application server on 64bit JVMs is, by default, using compressed references (-Xcompressedrefs). Due to native OutOfMemory error, I would like to remove that default, so there is no such limitation imposed on my native memory size. | To avoid this problem, the generic JVM argument [http://www-01.ibm.com/support/docview.wss?uid=swg21417365] -Xgc:preferredHeapBase=<address> [http://publib.boulder.ibm.com/infocenter/javasdk/v6r0/topic/com.ibm.java.doc.diagnostics.60/diag/understanding/mm_compressed_references.html] can be used to ensure the Java heap is allocated above the 4GB address space. This will leave more room for the Class Pointer and Monitor/Lock memory. | [
"IBM Using -Xgc:preferredHeapBase with -Xcompressedrefs - United States TECHNOTE (FAQ)\n\nQUESTION\n \"Why does the JVM report a native out-of-memory (NOOM) when using compressed references? I am using a 64bit JVM and I clearly have plenty of memory left. How can I resolve this problem?\" \n\nCAUSE",
"*In this n... | [
"To avoid this problem, the generic JVM argument [http://www-01.ibm.com/support/docview.wss?uid=swg21417365] -Xgc:preferredHeapBase=<address> [http://publib.boulder.ibm.com/infocenter/javasdk/v6r0/topic/com.ibm.java.doc.diagnostics.60/diag/understanding/mm_compressed_references.html] can be used to ensure the Java ... | [
6
] | 1,467 | 3,187 | 11,345 |
TRAIN_Q040 | Is it recommended to use symbolic links when installing Omnibus 8.1 fixpacks? Is it recommended to use symbolic links when installing Omnibus 8.1 fixpacks? | You install IBM Installation Manager by using symbolic links at the root level for the agent data location or the installation location or for both locations and after a system change or system restart you cannot start Installation Manager or you cannot use Installation Manager to update or uninstall products. | [
"IBM Installation Manager does not work if symbolic links are used for Installation Manager of installed product locations - United States RN1.5; RN1.5.1; RN1.5.0.1; RN1.5.2; RN1.5.3; RN1.6; RN1.6.1; RN1.6.2; RN1.6.3; RN1.6.3.1; RN1.7; RN1.7.1; RN1.7.2; SRX; 1628092; RATLC02668456; IPL; Symlink TECHNOTE (TROUBLESHO... | [
"You install IBM Installation Manager by using symbolic links at the root level for the agent data location or the installation location or for both locations and after a system change or system restart you cannot start Installation Manager or you cannot use Installation Manager to update or uninstall products."
] | [
0
] | 342 | 526 | 2,315 |
End of preview. Expand
in Data Studio
README.md exists but content is empty.
- Downloads last month
- 7