AxionLab-Co/DogeAI-v2.0-4B-Reasoning
Text Generation
•
4B
•
Updated
•
130
•
3
AxionLab
AxionLab-official
AI & ML interests
None yet
Recent Activity
updated
a model
5 minutes ago
AxionLab-Co/DogeAI-v2.0-4B-Reasoning
updated
a model
7 minutes ago
AxionLab-official/MiniText-v1.5-Prototype
published
a model
7 minutes ago
AxionLab-official/MiniText-v1.5-Prototype
Organizations
updated
a
model
5 minutes ago
updated
a
model
7 minutes ago
published
a
model
7 minutes ago
liked
a
Space
about 2 hours ago
Qwhen are you making an 8b version???
🤝
👀
3
1
#1 opened about 2 hours ago
by
crownelius
liked
2
Spaces
about 3 hours ago
upvoted
a
collection
2 days ago
THANKS QWEN TEAM I'M SO HYPED TO THE QWEN 3.5 LETSS GOOO
❤️
6
#15 opened 2 days ago
by
AxionLab-official
liked
a
Space
2 days ago
reacted to
kostakoff's
post with 👍🔥🚀
3 days ago
Post
3221
My home lab for AI models - llmlaba v1
After I began learning MLOps I realized that I needed some kind of home lab, there are a lot of GPUs that I need to learn how to set up and test.
So I spent some time to do a researching which platform I could buy or build.
My requirements ware:
- Limited budget
- Power supply 1 kW or higher
- Few PCIe slots to be able to install more than one gpu
- Zero maintenance cost, I don't want spend a lot of time or money to maintain lab hardware, except for the GPUs
I chose the Intel Mac Pro 7.1:
- Prices on eBay acceptable
- Excelent cooling
- 1.4 kW power supply
- 7 PCIe slots
- Zero maintenance: I don't need to do anything with the Mac Pro hardware; it just works
- Classic UEFI boot loader
It requires a bit of OS preparation:
1. Install Ubuntu 24.04 (it works with the general PC ISO image)
2. Set up T2 drivers
3. Install t2fanrd to manually manage fans (/etc/t2fand.conf) https://wiki.t2linux.org/guides/fan/
4. Fix PCIe BAR: add pci=realloc to GRUB_CMDLINE_LINUX_DEFAULT so the Linux kernel will properly initializes server GPUs without Graphics Output Protocol
5. Install NVIDIA GPU driver:
And it works!
I was able to run server-grade Nvidia Tesla P100 (required DIY air duct), and consumer Nvidia Titan X, Titan V, GTX 1080 cards on the old Mac Pro 7.1 - even three in parallel.
llmlaba
After I began learning MLOps I realized that I needed some kind of home lab, there are a lot of GPUs that I need to learn how to set up and test.
So I spent some time to do a researching which platform I could buy or build.
My requirements ware:
- Limited budget
- Power supply 1 kW or higher
- Few PCIe slots to be able to install more than one gpu
- Zero maintenance cost, I don't want spend a lot of time or money to maintain lab hardware, except for the GPUs
I chose the Intel Mac Pro 7.1:
- Prices on eBay acceptable
- Excelent cooling
- 1.4 kW power supply
- 7 PCIe slots
- Zero maintenance: I don't need to do anything with the Mac Pro hardware; it just works
- Classic UEFI boot loader
It requires a bit of OS preparation:
1. Install Ubuntu 24.04 (it works with the general PC ISO image)
2. Set up T2 drivers
sudo apt install -y dkms linux-headers-$(uname -r) applesmc-t2 apple-bce lm-sensors3. Install t2fanrd to manually manage fans (/etc/t2fand.conf) https://wiki.t2linux.org/guides/fan/
4. Fix PCIe BAR: add pci=realloc to GRUB_CMDLINE_LINUX_DEFAULT so the Linux kernel will properly initializes server GPUs without Graphics Output Protocol
5. Install NVIDIA GPU driver:
sudo apt install nvidia-driver-570And it works!
I was able to run server-grade Nvidia Tesla P100 (required DIY air duct), and consumer Nvidia Titan X, Titan V, GTX 1080 cards on the old Mac Pro 7.1 - even three in parallel.
- 3 replies
upvoted
a
collection
3 days ago
liked
a
dataset
4 days ago
updated
a
Space
4 days ago
published
a
Space
4 days ago
liked
a
Space
4 days ago
liked
a
model
4 days ago
liked
a
model
5 days ago