sequence stringlengths 1.16k 23.8k | docstring stringlengths 5 7.69k |
|---|---|
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '9']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'fit'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'sel... | Learn the linear transformation to flipped eigenvalues.
Parameters
----------
X : array, shape [n, n]
The *symmetric* input similarities. If X is asymmetric, it will be
treated as if it were symmetric based on its lower-triangular part. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '16']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'build_twisted_request'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7', '10', '13']}; {'id': '4', 'type': 'identi... | Build a request for twisted
Args:
method (str): Request method (GET/POST/PUT/DELETE/etc.) If not specified, it will be POST if post_data is not None
url (str): Destination URL (full, or relative)
Kwargs:
extra_headers (dict): Headers (override default connection hea... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '19']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'add_item'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7', '10', '13', '16']}; {'id': '4', 'type': 'identifier', ... | Add an item at a specific location, possibly replacing the
existing item.
If after is True, we insert *after* the given index, otherwise we
insert before.
The position is specified using either index or pos_key, the former
specifies the position from the start of the array (bas... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'put_multiple'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': ... | put a list of tasks and their arguments
This method can be used to put multiple tasks at once. Calling
this method once with multiple tasks can be much faster than
calling `put()` multiple times.
Parameters
----------
task_args_kwargs_list : list
A list of ... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'cmd_add'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'opts'}; {... | Add one or more existing Docker containers to a Blockade group |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '13']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'print_exception'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7', '10']}; {'id': '4', 'type': 'identifier', 'chil... | Print exception up to 'limit' stack trace entries from 'tb' to 'file'.
This differs from print_tb() in the following ways: (1) if
traceback is not None, it prints a header "Traceback (most recent
call last):"; (2) it prints the exception type and value after the
stack trace; (3) if type is SyntaxError ... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '10']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'calculate_concordance_by_annotation'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7']}; {'id': '4', 'type': 'iden... | Returns the concordance scores for each stratified graph based on the given annotation
:param pybel.BELGraph graph: A BEL graph
:param str annotation: The annotation to group by.
:param str key: The node data dictionary key storing the logFC
:param float cutoff: The optional logFC cutoff for significan... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '7']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'Newline'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'default_parameter', 'children': ['5', '6']}; {'i... | A rule that accepts token of kind ``newline`` and returns an empty list. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '9']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'FPE'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'N'}... | r"""Final prediction error criterion
.. math:: FPE(k) = \frac{N + k + 1}{N - k - 1} \rho_k
:validation: double checked versus octave. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '7']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'set_sim_params'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6']}; {'id': '4', 'type': 'identifier', 'children': [], 'v... | Store parameters in `params` in `h5file.root.parameters`.
`nparams` (dict)
A dict as returned by `get_params()` in `ParticlesSimulation()`
The format is:
keys:
used as parameter name
values: (2-elements tuple)
first element is the ... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '12']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'tf_loss'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7', '8', '9']}; {'id': '4', 'type': 'identifier', 'children... | Creates the TensorFlow operations for calculating the L2 loss between predicted
state values and actual rewards.
Args:
states: Dict of state tensors.
internals: List of prior internal state tensors.
reward: Reward tensor.
update: Boolean tensor indicating... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'apt_key_exists'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'ke... | Check if the given key id exists in apt keyring. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '13']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'add_missing_particles'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '8', '11']}; {'id': '4', 'type': 'identifier', 'chi... | Attempts to add missing particles to the state.
Operates by:
(1) featuring the difference image using feature_guess,
(2) attempting to add the featured positions using check_add_particles.
Parameters
----------
st : :class:`peri.states.State`
The state to check adding particles to.
... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '18']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'reviews'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '9', '12', '15']}; {'id': '4', 'type': 'identifier', 'childr... | Browse reviews for an application
Args:
packageName (str): app unique ID.
filterByDevice (bool): filter results for current device
sort (int): sorting criteria (values are unknown)
nb_results (int): max number of reviews to return
offset (int): return... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '12']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'gce_list_aggregated'}; {'id': '3', 'type': 'parameters', 'children': ['4', '7', '10']}; {'id': '4', 'type': 'default_parameter', 'chi... | General aggregated list function for the GCE service. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '17']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': '_epd_residual2'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7', '8', '9', '10', '11', '12', '13', '14', '15', '1... | This is the residual function to minimize using
scipy.optimize.least_squares.
This variant is for :py:func:`.epd_magseries_extparams`. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '23']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'ddel_tasks'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '8', '11', '14', '17', '20']}; {'id': '4', 'type': 'identifier... | Kill jobs or job tasks.
This function separates ddel logic from flag parsing and user output. Users
of ddel who intend to access the data programmatically should use this.
Args:
provider: an instantiated dsub provider.
user_ids: a set of user ids who "own" the job(s) to delete.
job_ids: a set of job... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'clique'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'graph... | Returns the largest possible clique for the node with given id. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'save'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'self'}; {'id... | Save repository .pyrepinfo to disk. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '13']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'grab'}; {'id': '3', 'type': 'parameters', 'children': ['4', '7', '10']}; {'id': '4', 'type': 'default_parameter', 'children': ['5', '... | Copy the contents of the screen to PIL image memory.
:param bbox: optional bounding box (x1,y1,x2,y2)
:param childprocess: pyscreenshot can cause an error,
if it is used on more different virtual displays
and back-end is not in different process.
Some back-ends are always di... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '22']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'search_point'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7', '10', '13', '16', '19']}; {'id': '4', 'type': 'ide... | Perform a catalog search over a specific point, specified by lat,lng
Args:
lat: latitude
lng: longitude
filters: Array of filters. Optional. Example:
[
"(sensorPlatformName = 'WORLDVIEW01' OR sensorPlatformName ='QUICKBIRD02')",
... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '9']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': '_get_key_internal'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '7']}; {'id': '4', 'type': 'identifier', 'children': [],... | Return None if key is not in the bucket set.
Pass 'force' in the headers to check S3 for the key, and after fetching
the key from S3, save the metadata and key to the bucket set. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'is_lower'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'self'}; ... | Asserts that val is non-empty string and all characters are lowercase. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'copy'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'src'}; ... | File copy that support compress and decompress of zip files |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '8']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'receive_json'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6']}; {'id': '4', 'type': 'identifier', 'children': [], 'val... | Rout the message down the correct stream. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'leave'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'self'}; {'i... | Send a leave request for the room. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'pretty_eta'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'second... | Print the number of seconds in human readable format.
Examples:
2 days
2 hours and 37 minutes
less than a minute
Paramters
---------
seconds_left: int
Number of seconds to be converted to the ETA
Returns
-------
eta: str
String representing the pretty ETA. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'backends'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'cls'}; {... | Discover all keyrings for chaining. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '7']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'neighbors_from_pixelization'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6']}; {'id': '4', 'type': 'identifier', 'chil... | Compute the neighbors of every Voronoi pixel as an ndarray of the pixel index's each pixel shares a \
vertex with.
The ridge points of the Voronoi grid are used to derive this.
Parameters
----------
ridge_points : scipy.spatial.Voronoi.ridge_points
Each Voronoi-ridg... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'verify_authority'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': '... | Verify the authority of the signed transaction |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': '_prompt_for_values'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value':... | Update the descriptive metadata interactively.
Uses values entered by the user. Note that the function keeps recursing
whenever a value is another ``CommentedMap`` or a ``list``. The
function works as passing dictionaries and lists into a function edits
the values in place. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '22']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'echo'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '8', '11', '14', '18']}; {'id': '4', 'type': 'identifier', 'children... | Add echoing to the audio.
Echoes are reflected sound and can occur naturally amongst mountains
(and sometimes large buildings) when talking or shouting; digital echo
effects emulate this behav- iour and are often used to help fill out
the sound of a single instrument or vocal. The time ... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '10']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'list'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '8']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 's... | Return a list of notification templates.
Note here configuration-related fields like
'notification_configuration' and 'channels' will not be
used even provided.
If one or more filters are provided through keyword arguments,
filter the results accordingly.
If no filters... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '10']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'load_npy_to_any'}; {'id': '3', 'type': 'parameters', 'children': ['4', '7']}; {'id': '4', 'type': 'default_parameter', 'children': ['... | Load `.npy` file.
Parameters
------------
path : str
Path to the file (optional).
name : str
File name.
Examples
---------
- see tl.files.save_any_to_npy() |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '13']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': '_saliency_map'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7', '8', '9', '10']}; {'id': '4', 'type': 'identifier... | Implements Algorithm 3 in manuscript |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'atomic_write'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'file... | Open a NamedTemoraryFile handle in a context manager |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '4']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'list_trilegal_filtersystems'}; {'id': '3', 'type': 'parameters', 'children': []}; {'id': '4', 'type': 'block', 'children': ['5', '14',... | This just lists all the filter systems available for TRILEGAL. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '11']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'convert_concat'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7', '8', '9', '10']}; {'id': '4', 'type': 'identifie... | Convert concatenation.
Args:
params: dictionary with layer parameters
w_name: name prefix in state_dict
scope_name: pytorch scope name
inputs: pytorch node inputs
layers: dictionary with keras tensors
weights: pytorch state_dict
names: use short names for ker... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'free'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'self'}; {'id... | Unlink and free the XML node owned by `self`. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '17']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'adjust_hue'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '8', '11', '14']}; {'id': '4', 'type': 'identifier', 'children... | Adjust hue of an RGB image.
This is a convenience method that converts an RGB image to float representation, converts it to HSV, add an offset to the hue channel, converts back to RGB and then back to the original data type.
For TF, see `tf.image.adjust_hue <https://www.tensorflow.org/api_docs/python/tf/image/... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '9']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'intersection'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6']}; {'id': '4', 'type': 'identifier', 'children': [], 'val... | Compute the intersection bounding box of this bounding box and another one.
Note that in extreme cases, the intersection can be a single point, meaning that the intersection bounding box
will exist, but then also has a height and width of zero.
Parameters
----------
other : img... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '8']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'pickByDistribution'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'va... | Pick a value according to the provided distribution.
Example:
::
pickByDistribution([.2, .1])
Returns 0 two thirds of the time and 1 one third of the time.
:param distribution: Probability distribution. Need not be normalized.
:param r: Instance of random.Random. Uses the system instance if one is
... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '8']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'prep'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'ctx'}; ... | Prepare for a release. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '8']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'getTemporalDelay'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'valu... | Returns the number of records that elapse between when an inference is
made and when the corresponding input record will appear. For example, a
multistep prediction for 3 timesteps out will have a delay of 3
Parameters:
-----------------------------------------------------------------------
infer... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '8']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'flip'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'self'};... | Flips the layer, either HORIZONTAL or VERTICAL. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '18']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'launchapp'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '9', '12', '15']}; {'id': '4', 'type': 'identifier', 'chil... | Launch application.
@param cmd: Command line string to execute.
@type cmd: string
@param args: Arguments to the application
@type args: list
@param delay: Delay after the application is launched
@type delay: int
@param env: GNOME accessibility environment to be s... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'from_spec'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'spec'};... | Creates an exploration object from a specification dict. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'set_physical_plan'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'val... | set physical plan |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '12']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'tempo'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '9']}; {'id': '4', 'type': 'identifier', 'children': [], 'valu... | Time stretch audio without changing pitch.
This effect uses the WSOLA algorithm. The audio is chopped up into
segments which are then shifted in the time domain and overlapped
(cross-faded) at points where their waveforms are most similar as
determined by measurement of least squares.
... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '11']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'load'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '8']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 's... | Searches for an appropriate config file. If found, loads the file into
the current instance. This method can also be used to reload a
configuration. Note that you may want to set ``reload`` to ``True`` to
clear the configuration before loading in that case. Without doing
that, values wi... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '4']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'mock_request'}; {'id': '3', 'type': 'parameters', 'children': []}; {'id': '4', 'type': 'block', 'children': ['5', '15', '21', '31']}; ... | Generate a fake request object to allow oEmbeds to use context processors. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '17']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'wait_for'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '8', '11']}; {'id': '4', 'type': 'identifier', 'children': [], '... | Wait for driver till satisfy the given condition
Support:
Android iOS Web(WebView)
Args:
timeout(int): How long we should be retrying stuff.
interval(int): How long between retries.
asserter(callable): The asserter func to determine the result.
... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': '_raw_at_zoom'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': ... | Return parameter dictionary per zoom level. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': '_add_uninstall'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value'... | generates uninstall.sh and adds it to included files |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'embed_code_links'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'valu... | Embed hyperlinks to documentation into example code |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'SETGE'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'cpu'};... | Sets byte if greater or equal.
:param cpu: current CPU.
:param dest: destination operand. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': '_data_analysis'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value'... | Data analysis endpoint.
:param data_view_id: The model identifier (id number for data views)
:type data_view_id: str
:return: dictionary containing information about the data, e.g. dCorr and tsne |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '9']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'call_method_with_acl'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7']}; {'id': '4', 'type': 'identifier', 'childr... | You should always use this function to call the methods,
as it checks if the user is allowed according to the ACLs.
If you override :meth:`process_packet` or
:meth:`process_event`, you should definitely want to use this
instead of ``getattr(self, 'my_method')()`` |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'flag_inner_classes'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value':... | Mutates any attributes on ``obj`` which are classes, with link to ``obj``.
Adds a convenience accessor which instantiates ``obj`` and then calls its
``setup`` method.
Recurses on those objects as well. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '7']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'proto_02_03_IVfast'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'default_parameter', 'children': ['5',... | fast sweeps, 1 step per sweep, for clean IV without fast currents. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'calc_inbag'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'n... | Derive samples used to create trees in scikit-learn RandomForest objects.
Recovers the samples in each tree from the random state of that tree using
:func:`forest._generate_sample_indices`.
Parameters
----------
n_samples : int
The number of samples used to fit the scikit-learn RandomFores... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'take_shas_of_all_files'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [],... | Takes sha1 hash of all dependencies and outputs of all targets
Args:
The graph we are going to build
The settings dictionary
Returns:
A dictionary where the keys are the filenames and the
value is the sha1 hash |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '11']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'pruneUI'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '8']}; {'id': '4', 'type': 'identifier', 'children': [], 'value':... | Display a list of files and prompt for ones to be kept.
The user may enter ``all`` or one or more numbers separated by spaces
and/or commas.
.. note:: It is impossible to accidentally choose to keep none of the
displayed files.
:param dupeList: A list duplicate file paths
:param mainPos: ... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'add_droplets'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': ... | Add the Tag to a Droplet.
Attributes accepted at creation time:
droplet: array of string or array of int, or array of Droplets. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'type'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'self'}; {'id... | Return 'suite' or 'resource' or None
This will return 'suite' if a testcase table is found;
It will return 'resource' if at least one robot table
is found. If no tables are found it will return None |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'rdkitmol_Hs'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'self'... | r'''RDKit object of the chemical, with hydrogen. If RDKit is not
available, holds None.
For examples of what can be done with RDKit, see
`their website <http://www.rdkit.org/docs/GettingStartedInPython.html>`_. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '9']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'record_conflict'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7', '8']}; {'id': '4', 'type': 'identifier', 'childr... | Record conflicts caused by addition or deletion of a Queen. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '13']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'missing_particle'}; {'id': '3', 'type': 'parameters', 'children': ['4', '7', '10']}; {'id': '4', 'type': 'default_parameter', 'childr... | create a two particle state and compare it to featuring using a single particle guess |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': '_create_element_list_'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'valu... | Extract an alphabetically sorted list of elements from the compounds of
the material.
:returns: An alphabetically sorted list of elements. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'div_img'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'img1... | Pixelwise division or divide by a number |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'create'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'self'}; {'... | Create new doamin |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'present'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'self... | Present the results as a list. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'mmPrettyPrintConnections'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'v... | Pretty print the connections in the temporal memory.
TODO: Use PrettyTable.
@return (string) Pretty-printed text |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '7']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'sim'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'sel... | Return the length similarity of two strings.
Length similarity is the ratio of the length of the shorter string to
the longer.
Parameters
----------
src : str
Source string for comparison
tar : str
Target string for comparison
Returns
... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '9']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'predict_proba'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7']}; {'id': '4', 'type': 'identifier', 'children': []... | Infer causal relationships between 2 variables using the RECI statistic
:param a: Input variable 1
:param b: Input variable 2
:return: Causation coefficient (Value : 1 if a->b and -1 if b->a)
:rtype: float |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '9']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'add'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'sel... | Add a constraint to the set
:param constraint: The constraint to add to the set.
:param check: Currently unused.
:return: |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'detail_view'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': '... | Renders the message view to a response. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '10']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'calculate'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7', '8', '9']}; {'id': '4', 'type': 'identifier', 'childr... | r'''Method to calculate thermal conductivity of a liquid mixture at
temperature `T`, pressure `P`, mole fractions `zs` and weight fractions
`ws` with a given method.
This method has no exception handling; see `mixture_property`
for that.
Parameters
----------
T... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '11']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'allow'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7', '8']}; {'id': '4', 'type': 'identifier', 'children': [], ... | Add allowing rules.
:param role: Role of this rule.
:param method: Method to allow in rule, include GET, POST, PUT etc.
:param resource: Resource also view function.
:param with_children: Allow role's children in rule as well
if with_children is `True` |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '10']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'save'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6', '7']}; {'id': '4', 'type': 'identifier', 'children': [], 'value... | Saves this component's managed variables.
Args:
sess: The session for which to save the managed variables.
save_path: The path to save data to.
timestep: Optional, the timestep to append to the file name.
Returns:
Checkpoint path where the model was save... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '8']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'trun_to_file'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': ... | Dump the given trun to file |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '7']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'get_homogeneous'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6']}; {'id': '4', 'type': 'identifier', 'children': [], '... | For each package check if the version in one repo is equal for all targets.
The version could be different in different repos though.
:return: a dict indexed by package names containing a boolean flag |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '29']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'copyto'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '8', '11', '14', '17', '20', '23', '26']}; {'id': '4', 'type': 'id... | Copy this file to other place. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '9']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'apt'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'sel... | Install specified packages using apt-get. -y options are
automatically used. Waits for command to finish.
Parameters
----------
package_names: list-like of str
raise_on_error: bool, default False
If True then raise ValueError if stderr is not empty
debcon... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'close'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'self'}; {'i... | Flush and close the stream.
This is called automatically by the base resource on resources
unless the resource is operating asynchronously; in that case,
this method MUST be called in order to signal the end of the request.
If not the request will simply hang as it is waiting for some
... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '10']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'fail'}; {'id': '3', 'type': 'parameters', 'children': ['4', '7']}; {'id': '4', 'type': 'default_parameter', 'children': ['5', '6']}; ... | Prints the specified message and exits the program with the specified
exit status. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': '_generateRangeDescription'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': ... | generate description from a text description of the ranges |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'get'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'self'}; ... | Return component by category name |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '8']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'get_unique_pathname'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'v... | Return a pathname possibly with a number appended to it so that it is
unique in the directory. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '24', '26']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'compare_signature'}; {'id': '3', 'type': 'parameters', 'children': ['4', '14']}; {'id': '4', 'type': 'typed_parameter', 'childr... | Compares the given signatures.
:param expected: The expected signature.
:type expected: Union[str, bytes]
:param actual: The actual signature.
:type actual: Union[str, bytes]
:return: Do the signatures match?
:rtype: bool |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'unhex'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 's'}; {'id':... | Get the integer value of a hexadecimal number. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'env_key'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'key'... | Try to get `key` from the environment.
This mutates `key` to replace dots with underscores and makes it all
uppercase.
my.database.host => MY_DATABASE_HOST |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'simplified_edges'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': '... | A generator for getting all of the edges without consuming extra
memory. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '9']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'pop'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '6']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'sel... | Removes the specified key and returns the corresponding value.
If key is not found, the default is returned if given, otherwise KeyError is raised.
:param key: The key
:param default: The default value
:return: The value |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '20']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'create_field'}; {'id': '3', 'type': 'parameters', 'children': ['4', '7', '10', '13', '16']}; {'id': '4', 'type': 'default_parameter',... | Return a field created with the provided elements.
Global position is set arbitrary to -1. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '7']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'update'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'x'}; ... | Update a dict, or an object with slots, according to `entries` dict.
>>> update({'a': 1}, a=10, b=20)
{'a': 10, 'b': 20}
>>> update(Struct(a=1), a=10, b=20)
Struct(a=10, b=20) |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '9']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'save'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5', '7']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'se... | A custom save method that handles figuring out when something is activated or deactivated. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'expire_password'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value... | Forces the user to change their password the next time they login. |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '5']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'config2'}; {'id': '3', 'type': 'parameters', 'children': ['4']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'self'}; {... | Read the second set of configuration variables and return as a dictionary.
**NOTE: This method is supported by firmware v18+.**
:rtype: dictionary
:Example:
>>> a.config2()
{
'AMFanOnIdle': 0,
'AMIdleIntervalCount': 0,
'AMMaxDataArraysInFil... |
{'id': '0', 'type': 'module', 'children': ['1']}; {'id': '1', 'type': 'function_definition', 'children': ['2', '3', '6']}; {'id': '2', 'type': 'function_name', 'children': [], 'value': 'filter'}; {'id': '3', 'type': 'parameters', 'children': ['4', '5']}; {'id': '4', 'type': 'identifier', 'children': [], 'value': 'names... | Return the subset of the list NAMES that match PAT |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.